WOW Docks and Lifts

Ask us about our Docks & Lifts!

WOWlogo.JPG

32_T_C_fpo.jpgPWC_LIFT_fpo.jpg

   Come in and Checkout our new line of Docks, PWC Lifts, and Boat Lifts.  Walks-On-Water dock company from Clear Lake MN proudly builds and stands behind their docks.  These Docks are very well built, durable, and stable.  We have both roll-in and sectional dock styles in standard 'packages' or we can custom design a dock to fit your individual needs.

32_T_C_fpo.jpg

Truss Docks

Truss framework is constructed of 12 inch deep aluminum side frames with a welded cross frame bolted-in every 4 feet. This frame is a series of 3 triangles that eliminates racking and side-to-side  distortion of our framework. This system is so solid that it eliminates the need for cross chains or any other so-called deep water kits. Our deep water kit is just longer posts.

Standard sections are 8 and 16 foot, with special sizes available if needed. Posts are galvanized steel. The wheel posts are 2 inch schedule 40 pipe and the intermediate support posts are 1-1/2 inch pipe. Post brackets are zinc-plated steel with stainless steel bolts for set screws. We use 2 set screws on wheel post brackets. The approximate weight of the 40 foot aluminum framework is 202 pounds. Western Red Cedar deckingis included.

Welded side and cross frames bolt  together for easy transport or replacement due to accidental damage. Additional sections can be added if lake conditions warrant. Accessories bolt on to the dock and  require no additional brackets or mounting holes. Height is easily adjustable by hand if you are in the water, or  from the deck with an optional cable come-along or post-mounted winch kit. Tires are 24-inch rotomolded plastic requiring no bearings or lubrication.

Sections can be added to the basic 32’ dock to make any length needed or to make slips. Wheeled sections are attached by a quick connect allowing the framework sections to flex at the connections as it is wheeled in and out. Upon removal, sections can be disconnected for storage. We have many 48’, 64’ and 96’ docks in the water. Our truss dock is also easy to customize for special needs.

a_32_SS_T_fpo.jpg

 

Our sectional dock is constructed in 8,10,16 and 20 foot sections using 2-inch by 5-inch rectangular aluminum tube with zinc-plated steel brackets with stainless steel screws. Posts are 1-1/2 inch galvanized steel pipe with plates. 8,10 and 16 foot sections come complete with all posts and hardware. 10’ sections weigh approximately 77lbs without decking.

16 sections are also available with a set of wheels. 20-foot sections have 1 set of posts and 1 wheel kit for the convenience of a roll-in.  Patio sections drop in along the side and are supported with posts.

PWC_LIFT_fpo.jpg

 

We have boat and pontoon lifts from 2000lb to 5000lb. capacities with widths up to 115 inches. Our standard lifts include individual rubber-topped aluminum boat bunks and a Lorenz custom-built, chain drive, gear reduction winch with aluminum winch wheel.

Our pontoon lifts feature 16’ long 2”x10” bunks which lift on the floor of the boat and not on the pontoons.

Our personal water craft lifts are available as either single (1300# cap) or double (2000# cap) lifts and canopies are available for either.

Accessories such as wheel kits, full-length bunks, motor stops and guide-ons are available. We also have several different electric winch options in both 110v and 12v.

Our lifts are fully assembled and ready for pick up or can be shipped unassembled.

Our canopies are extra deep to provide more protection from sun and rain. They are made from an acrylic-coated polyester fabric and resist tearing and fading. Available colors are gray, beige, blue, green and burgundy.

a_acceslyout.jpg

 

We offer a full line of accessories for your dock. We have  bumpers, (corner, post, end and flat), 3 and 4 step ladders, floats, benches, stairways, 4 and 8  ft gangplanks, shore wheels and post kits.  Our bumpers are a full 3 feet long and ‘T-nuts‘ are molded into the plastic. This allows the bumper to bolt right to our dock through existing mounting holes. Your boat’s paint stays safe even in windy conditions because the rub rail will ride up and down along the bumper, not bounce into the dock or, even worse, get caught under it!                                         

We also offer custom items such as our new Homecrest dock chairs and table, made right here in Wadena, MN.  Since we do our own manufacturing, we are also able to customize any of our accessories to suit your needs.

We offer a full line of accessories for your dock. We have bumpers, (corner, post, end and flat), 3 and 4 step ladders, floats, benches, stairways, 4 and 8 ft gangplanks, shore wheels and post kits. Our bumpers are a full 3 feet long and ‘T-nuts‘ are molded into the plastic. This allows the bumper to bolt right to our dock through existing mounting holes. Your boat’s paint stays safe even in windy conditions because the rub rail will ride up and down along the bumper, not bounce into the dock or, even worse, get caught under it!                                          

We also offer custom items such as our new Homecrest dock chairs and table, made right in Wadena, MN. Since we do our own manufacturing, we are also able to customize any of our accessories to suit your needs.

back_cover.jpg